4GE VOIP CATV WIFI6 XPON ONU BT-G710AX

4GE+VoIP+CATV+2.4G+5G WIFI6 AX1800 / external antennas)

♦ Dual band Wi-Fi, Superior performance of Wireless 11n 11ac and 11ax Transmission
♦ Compatible with 95% Third-party OLTs (Including Huawei/ZTE/Fiberhome/BT-PON and so on)
♦ Spport EPON/GPON mode and switch mode automatically
♦ Support Route PPPoE/DHCP/Static IP and Bridge mode
♦ Support ONU auto-discovery/Link detection/remote upgrade of software
♦ Support IPv4/IPv6 dual mode
♦ Support Firewall function and IGMP multicast feature
♦ Support LAN IP and DHCP Server configuration
♦ Support Port Forwarding and Loop-Detect
♦ Support CATV interface for Video Service,support to turn off CATV functionality

The BT-G710AX model ONU is a high-performance, low-power consumption FTTH optical network unit designed to meet the application requirements of various data services in FTTH networking scenarios. This advanced device is equipped with dual-band Wi-Fi, supporting superior wireless transmission performance with standards 11n, 11ac, and 11ax. It is compatible with a wide range of third-party OLT, including those from Huawei, ZTE, Fiberhome and BT-PON, and can operate in both EPON and GPON modes, switching automatically.

Support EPON/GPON mode and switch mode automatically
GPON:Compliance with IEEE 802.3ah & itu-t g.984.x standard
GPON:8 T-CONTs, 32 GEM Ports
Integrate OMCI(GPON)/OAM(EPON) and TR-069 remote configuration and maintenance
Layer 3 Home Gateway/CPE features with Hardware NAT, support Multiple WAN, Route/Bridge mode, etc
Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc
Bi-directional FEC
Support firewall level Settings, support based on URL/MAC/ IP/ address frame filtering
Support multicast IGMP v2 proxy/ snooping, support MLD proxy/ snooping
Qos supports PQ, WRR, and CAR queue scheduling
Provide Maximum rate 1775Mbps Wireless interface, 2T2R external antenna, support multiple
SSID Settings
Support DDSN, ALG, DMZ and UPNP
Provide POTS interface, support SIP protocol,POTS integrated circuit test complies GR-909
Support CATV interface for Video Service,support to turn off CATV functionality

 

Hardware Specifications
Size205*140*30mm
205*140*30mm1*GPON/EPON
User interface4GE LAN +1 VOIP +2.4G &5.8G WIFI 6
Indicator lightPOWER/PON/LOS/LAN1/LAN2/LAN3/LAN4/TEL1/USB
2.4G/5G/WPS
ButtonPower switch Button, Reset Button, WLAN Button, WPS Button
Weight300g
Power adapter input100V~240V AC,50Hz~60Hz
PowerSupply requirement12V DC,1.5A
Power consumption<10w
Working temperature-10°C ~ +45°C
Environment humidity5% ~ 95% (Non-condensing)
PON Interface
Module typeClass B+ SC/UPC
Working wavelengthPON: up 1310nm,down 1490nm
TX Optical power value0.5~4dbm
RX Optical power sensitivity-28dBm
Transmission distance0~20km
Transmission rateGPON:Up 1.244Gbps;down 2.488Gbps
EPON:Up 1.244Gbps;down 1.244Gbps
Ethernet Interface
Interface type4*RJ45
Interface parameters4*10/100/1000Mbps auto adaptive Ethernet interfaces
Wireless
Working modeIEEE 802.11 b/g/n/AC/AX
Antenna patternExternal 2*2T2R External antenna
Antenna gain5dBi
Wireless bandwidthSupport 20MHz/40MHz/80MHz
Interface rateMaximum rate 1775Mbps
SSIDUp to 4 SSID broadcasts are supported
POTS interface
Interface type1* RJ11
Voice agreementSIP
CodecsG.711/G.723/G.726/G.729
Integrated circuit protocolGr-909 protocol is applicable
CATV Interface
Optical receiving wavelength1550±10nm
Optical reflection loss≥45dBm
RF, WDM, optical power+2~-15dBm
RF frequency range47~1000MHz, RF output impedance: 75Ω
RF output level78dBuV
AGC range0~-12dBm
MER≥32dB@-15dBm

BT-G710AX_Datasheet