2GE CATV AC1200 xPON ONT BT-718XR

2GE+CATV+2.4G+5G WIFI5 AX1200 / external antennas)

♦ Dual band Wi-Fi, Superior performance of Wireless 11n and 11ac Transmission
♦ Compatible with 95% Third-party OLTs (Including Huawei/ZTE/Fiberhome/BT-PON and so on)
♦ Spport EPON/GPON mode and switch mode automatically
♦ Support Route PPPoE/DHCP/Static IP and Bridge mode
♦ Support CATV interface for Video Service,supporting remote control by OLT.
♦ Support ONU auto-discovery/Link detection/remote upgrade of software
♦ Support IPv4/IPv6 dual mode
♦ Support Firewall function and IGMP multicast feature
♦ Support LAN IP and DHCP Server configuration
♦ Support Port Forwarding and Loop-Detect

BT-718XR model ONU is a user terminal device independently developed by BTPT in line with such industrial background.The device has built-in two-layer switching function and three-layer routing function. With compact structureand small appearance, it is a kind of FTTH optical network unit with high performance and low power consumption,which is very suitable for the application requirements of various data services in FTTH networking scenarios ofvarious operators. BT-718XR is an XPON product that can be adapted to EPON and GPON networks without replacing equipment and firmware.

Hardware Specifications
Size(L*W*H)160*115 *28mm
Optical signal access1*GPON/EPON
User interface2GE+CATV+AC1200
Indicator lightPOWER/PON/LOS/LAN1/LAN2/2.4G/5G/WPS/CATV
ButtonPower switch Button, Reset Button, WLAN Button, WPS Button
Weight250g
Power adapter input100V~240V AC,50Hz~60Hz
PowerSupply requirement12V DC,1.5A
Power consumption<10w
Working temperature-10°C ~ +45°C
Environment humidity5% ~ 95% (Non-condensing)
PON Interface
Module typeSC/APC
Working wavelengthPON:up 1310nm,down 1490nm, CATV: 1550nm
TX Optical power value0.5~4dBm
RX Optical power valueReceiver sensitivity:-27dBm
Transmission distance0~20km
Transmission rateGPON:Up 1.244Gbps;down 2.488Gbps
EPON:Up 1.244Gbps;down 1.244Gbps
Ethernet interface
Interface type 2*RJ45
Interface parameters 2*10/100/1000Mbps auto adaptive Ethernet interfaces
Wireless
Working modeIEEE 802.11 b/g/n/AC
Antenna patternExternal 2T2R External antenna
Antenna gain5dBi
Wireless bandwidthSupport 20MHz/40MHz/80MHz
Interface rate2.4G WLAN:Maximum rate 300Mbps
5.8G WLAN:Maximum rate 866Mbps
SSIDUp to 4 SSID broadcasts are supported
CATV Interface
Optical receiving wavelength1550±10nm
Optical reflection loss≥45dBm
RF, WDM, optical power+2~-15dBm
RF frequency range47~1000MHz, RF output impedance: 75Ω
RF output level78dBuV
AGC range0~-12dBm
MER≥32dB@-15dBm