Address
Floor 3, Building B, Honghua Science And Technology Innovation Park,
Longhua District, Shenzhen
Work Hours
Monday to Friday: 9AM - 9PM
Weekend: 10AM - 6PM
Address
Floor 3, Building B, Honghua Science And Technology Innovation Park,
Longhua District, Shenzhen
Work Hours
Monday to Friday: 9AM - 9PM
Weekend: 10AM - 6PM
1GE SFU&Route ONU
♦ GPON working mode Compliance with IEEE 802.3ah & itu-t g.984.x standard
♦ GPON:8 T-CONTs,32 GEM Ports
♦ EPON working mode compliant with IEEE 802.3ah specification and OAM protocol
♦ Supports the WEB configuration function
♦ Support SFU and HGU types, can switch to use each other
♦ HGU type,Support PPPoE/ Static IP/ DHCP
♦ Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc
♦ Layer 3 Home Gateway/CPE features with Hardware NAT, supports Route mode, etc
♦ Supports the configuration of Ethernet interface rates, working modes,MDI/ MDIX auto-negotiation mode, and Pause flow control
♦ Provides performance statistics on all Ethernet lines
♦ Support multicast IGMP snooping
♦ Supports the L2 wire speed forwarding
♦ Supports the AES-128 algorithm for data encryption of downlink data
BT-122XR model ONU is a user terminal device independently developed by BTPT in line with such industrial background.The device has built-in two-layer switching function . It is compact and compact, and is an FTTH optical network unit with high performance and low power consumption.BT-122XR ONU can automatically switch EPON/GPON working mode and can be used in EPON/GPON network, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.
1GE GEPON ONU meets telecom operators FTTO (office), FTTD (Desk), FTTH(Home) broadband speed, SOHO broadband access, video surveillance and other requirements and design a xPON Gigabit Ethernet products.
Hardware Specifications | |
---|---|
Size(L*W*H) | 90mm (L) ×90mm (W) ×24mm (H) |
Optical signal access | EPON/GPON |
User interface | 1GE |
Indicator light | POWER/PON/LOS/LAN |
Button | Power switch Button, Reset Button |
Weight | 95g |
Power adapter input | 100V~240V AC,50Hz~60Hz |
PowerSupply requirement | 12V DC,0.5A |
Power consumption | <6w |
Working temperature | -10°C ~ +45°C |
Environment humidity | 5% ~ 95% (Non-condensing) |
PON Interface | |
Module type | SC/UPC |
Working wavelength | up 1310nm,down 1490nm |
TX Optical power value | 0.5~4dbm |
RX Optical power sensitivity | -27dBm |
Transmission distance | 0~20km |
Transmission rate | GPON:Uplink 1.244Gbps;downlink 2.488Gbps |
EPON:Uplink 1.244Gbps;downlink 1.244Gbps | |
Ethernet interface | |
Interface type | RJ45 |
Interface parameters | 1 x 10/100/1000Mbps auto adaptive Ethernet interfaces |